Cal Flame CU-250B User Manual download pdf (Page 36)

30 FIREYE

System Components

Multi Purpose Power Supply (19MPS-2000)

The 19MPS-2000 is a rack mounted power supply

which operates on either 120 or 220 VAC input power

(switch selectable - Factory set for 220 VAC operation),

and provides supply voltage for two (2) 25SU3-2000,

-2100 amplifiers and up to four (4) low voltage (e.g.

45RM4, 45FS1, 45UVFS1, C9701, C9707) or line voltage

(e.g. 45RM1, 45RM2, 45UV5) flame scanners in any

combination. The 19MPS-2000 will fit into the Fireye 19"

full rack (P/N 60-2471-3), 19" half rack (60-2471-1), or

surface mounted wiring rack (60-2530). When used with

the 19" full or half rack (60-2471-3,-1), a 60-2481 or 60-

2482 connector is required and must be ordered separately.

A green LED indicates when power is applied to the

19MPS-2000 power supply.

SPECIFICATIONS:

ELECTRICAL

Electrical supply to the 19MPS-2000 is 120 or 220 VAC, 50/60 Hz.

Switch selectable.

Factory set for 220 VAC operation. Maximum current output = 650 ma.

ENVIRONMENTAL

Storage Temp: Minimum: - 4 F (-20 C)

Maximum: 176 F (80 C)

Operating Temp: Minimum: - 4 F (-20 C)

Maximum: 140° F (60° C)

Humidity: Maximum: 85% Relative Humidity (Non-condensing).

PART NUMBER DESCRIPTION

19MPS-2000 Multi-purpose power supply (120 or 220 VAC) - Factory set for 220 VAC operation.

60-2481 Screw terminal type connector for 19MPS-2000

60-2482 Spade terminal type connector for 19MPS-2000

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 55 56

No comments

Cal Flame CU-250B User Manual Page 36